Installation preparation tips
Measure first
It’s very important that you measure the area where your appliance will be placed and be sure that your product will fit within the given dimensions. Check the entire pathway that the appliance will take to get to its final destination. Ensure that it will fit through each hallway and doorway of the entire path. Warners’ Stellian is unable to modify existing openings to accommodate your new appliances.
Check your connections
Make sure to have an appropriate electric outlet within 3 1/2′ of the space you’ve selected for your new product. Check to see that the outlet is grounded (accepts a three-prong plug), since most appliances require one. For electric dryers, electric ranges be sure to check for the required 240V electric connection (also applies to some air-conditioners).
Measure again
Take another look at the pathway en route to the final destination of your appliance and ensure that your product will fit through the designated space.
> See all product measuring guides
Installation services what’s included?
Refrigerators:
We will install your new freestanding refrigerator into proper existing facilities. We will reconnect an existing water line to your new refrigerator for $79.99. Be sure to verify all measurements prior to purchase as we are unable to modify existing openings to accommodate your new appliance. Installation of any built-in refrigerator can be arranged at the time of purchase – additional charges will apply due to unique install requirements.
Download refrigerator measuring guide
Ranges:
We will re-install your new freestanding range into proper existing facilities. Due to in-home fuel safety codes, the purchase of a new electrical cord or gas flex is required for all range re-installations. Installation parts are available at checkout (prices vary). For safety reasons, we require that a separate shutoff valve is present for all gas re-installations. In some cities, additional installation permits are required (options made available at time of purchase). Gas ranges are configured for natural gas fuel type, if a liquid propane (LP) conversion is needed, select at time of checkout or speak with your sales associate regarding setup and additional charges.
Download range measuring guide
Dishwashers:
Dishwasher installation services are available to add at time of purchase, prices vary. If installation services are selected, we will install your new dishwasher into proper existing facilities. Proper electrical connections, existing inlet (with separate shutoff valve) and drain lines are required on site for all dishwasher installations. Be sure to verify all measurements prior to purchase as we are unable to modify existing countertops, flooring or cabinetry to accommodate your new dishwasher. Per Minnesota state code, hammer arrestors are required for dishwasher installation. See your sales associate for full details & cost.
Download dishwasher buying guide
Microwaves:
Microwave installation services are available to add at time of purchase, prices vary. If installation services are selected, we will re-install your new over-the-range microwave into proper existing facilities. A 15 amp electrical power connection is required for installation. We can convert an existing hard wire connection to an electrical outlet for an additional fee, if needed. This service should be arranged with your sales associate prior to delivery.
Download microwave buying guide
Washers:
We will re-install your new washer into proper existing facilities. Proper plumbing and electrical connections are required for installation. New washer hoses are required for proper installation. Hoses are available in rubber or stainless steel and can be added at time of purchase. Be sure to verify all measurements as we are unable to modify existing openings or any existing connection fixtures to accommodate your new washer. Per Minnesota state code, hammer arrestors are required for washer installation. See your sales associate for full details & cost.
Download laundry buying guide
Dryers:
We will re-install your new dryer into proper existing facilities. Due to in-home fuel safety codes, the purchase of a new electrical cord or gas flex is required for all dryer installations. The purchase of code-compliant venting materials is also required; Warners’ Stellian is unable to reconnect flexible, corrugated venting. In some cities, additional installation permits are required.
For safety reasons, a separate shutoff valve is required for all gas installations. Side venting is available for an additional cost and should be arranged with your sales associate prior to delivery. Gas dryers are configured for natural gas fuel type. If you need a liquid propane (LP) conversion, select at time of checkout or speak with your sales associate regarding setup and additional charges.
Download laundry buying guide
Air-conditioners:
Air-conditioner installation services are available to add at time of purchase, prices vary. If installation services are selected, we will install your new air conditioner into proper existing facilities. Wall unit installations require an existing sleeve capable of accommodating the new unit. Installation of window units will be completed on the first floor only. Be sure to verify all measurements prior to purchase as we are unable to modify existing openings to accommodate your new air conditioner.
| related information |
| local install services |
| appliance planning guide |
| appliance hookup guide |
| shipping & delivery methods |
| local delivery schedule |
| track your delivery |
 |